🚨 2024 Genesis G80: Emergency Neutral
The 2024 G80 uses a console-mounted electronic shifter with modern electronic shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Apply the parking brake firmly and chock the wheels.
- Turn the ignition to ACC or ON position if battery has any charge remaining.
- Locate the shift lock release access - look for a small cover or slot on the left side of the shifter assembly near the base, or consult the recess area forward of the shifter.
- Use a small flathead screwdriver or key to pry off any protective cover.
- Insert the tool into the shift lock release slot and press down firmly.
- While holding the release mechanism down, move the shifter to Neutral position.
- If the shifter will not move, ensure the release is fully depressed - the mechanical override must overcome the solenoid lock.
Shift-lock override location
Area near the left side or forward of the shifter base - exact location may vary; check owner's manual or look for small cover panel in shifter surround
With zero electrical power
With zero electrical power, the shift lock override is mechanical. No ignition power is required - the override physically releases the shifter lock mechanism. Remove the access cover, depress the release fully with a tool, and shift to Neutral.