ShopBaseComplete shop management for auto repair shops · $249/mo
Try ShopBase →

← All GMC models

🚨 2024 GMC Hummer EV SUV: Emergency Neutral

The 2024 Hummer EV SUV uses a console-mounted electronic shift control with push-button gear selection (P, R, N, D) integrated into the center console.

Expert-verified by Chris Hackleman & Jeff Moore — master technicians, 20+ years each.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.

The procedure

  1. Ensure vehicle is on a level surface and wheel chocks are in place.
  2. Attempt to power on the vehicle by pressing the brake pedal and pushing the Power button - even with a weak battery, you may get enough power to shift.
  3. If the 12V system has any power at all, press and hold the brake pedal firmly, then press the 'N' (Neutral) button on the shift control panel.
  4. If there is absolutely no 12V power: locate the 12V battery jump-start terminals under the hood (positive terminal under red cover on passenger side, negative ground point nearby).
  5. Connect a jump pack or jumper cables to provide temporary 12V power to the vehicle systems.
  6. With 12V power restored, press the Power button (you do not need to fully boot the vehicle), press and hold the brake, then press 'N' for Neutral.
  7. If the shift interlock is failed but 12V power is present: look for a small shift lock override access - typically a small covered slot or cap near the base of the shift button panel on the console.
  8. Insert a small flathead screwdriver or the key blade into the override slot while pressing the 'N' button.
  9. Once in Neutral, the vehicle can be moved or loaded onto a flatbed.
Shift-lock override location
Small shift lock override access near the electronic shift control button panel on the center console (exact location requires visual confirmation as GM has not widely published this for the Hummer EV)
With zero electrical power
With zero 12V power, you MUST jump-start the 12V battery using the under-hood terminals before the electronic shifter will function. The Hummer EV cannot be shifted without 12V power to the body control systems.
⚡ EV / hybrid warning
CRITICAL: The Hummer EV SUV weighs up to 9,640 lbs and MUST be transported on a flatbed with all four wheels off the ground. DO NOT tow with any wheels on the ground - the electric drive units will be damaged. Before loading, ensure the vehicle is in Neutral and that the parking brake is released (may require 12V power). If the high-voltage system is damaged or unknown, treat as hazardous and do not attempt to shift - call specialized EV recovery.
📖 Why cars lock in Park (full guide)🔧 All repair data for this Hummer EV SUV🚨 Still stuck? Ask a master tech →