🚨 2005 Jeep Wrangler: Emergency Neutral
The 2005 Wrangler TJ has a traditional PRNDL console-mounted shifter lever with a mechanical shift lock button on the front of the shifter handle.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Set the parking brake firmly and chock the wheels
- Turn the ignition key to the ACC or ON position if battery power is available
- Press and hold the brake pedal
- Press the shift lock button on the front of the shifter handle and move the lever to Neutral
- If the shift lock will not release, locate the shift lock override slot - it is a small rectangular opening on the left side of the shifter base housing near where the lever pivots
- Insert a small flathead screwdriver or the emergency key blade into the override slot
- Push the override mechanism while simultaneously moving the shifter lever to Neutral
- If successful, the vehicle can now roll freely
Shift-lock override location
Small rectangular slot on the left side of the shifter base housing, adjacent to the lever pivot point
With zero electrical power
With zero electrical power, the mechanical shift lock override must be used. Insert a tool into the override slot on the left side of the shifter base and push firmly while moving the shifter to Neutral. The ignition key does not need to be in any particular position for the mechanical override to work.