🚨 2023 Kia Telluride: Emergency Neutral
The 2023 Kia Telluride uses a traditional console-mounted electronic shift lever with a shift-lock button on the right side of the shifter handle.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and wheels are chocked.
- Turn the ignition to ACC or ON position if 12V power is available (press start button without brake pedal).
- Locate the shift-lock override slot: a small rectangular rubber cap directly to the left of the shifter base on the console, near the driver's side.
- Use a flat-blade screwdriver or key to pry off the rubber cap.
- Insert the screwdriver or key into the override slot and press down firmly.
- While holding the override down, press the shifter button and move the shifter to Neutral.
- If the vehicle has no power at all, follow the no-power procedure below.
Shift-lock override location
Small rectangular rubber cap to the left of the shifter base on the console, driver's side
With zero electrical power
With zero 12V power, the electronic shifter will not release. You must jump-start the 12V battery (located under the hood) or connect a portable jump starter to get at least ACC power, then use the shift-lock override procedure. The Telluride cannot be shifted without any electrical power.