🚨 2018 Land Rover Range Rover Sport: Emergency Neutral
The 2018 Range Rover Sport uses a rotary gear selector dial that rises from the center console when powered.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground and parking brake is engaged
- Attempt to turn ignition to ON position - the rotary selector should rise from the console
- If the rotary dial does not rise due to power loss, locate the manual release slot on the console where the dial is recessed
- Remove the small rubber or plastic cover in the center of the rotary dial recess (may require small flat-blade screwdriver)
- Insert the emergency release tool (or small screwdriver) into the slot and turn or press as indicated by markings
- Manually rotate the dial to N position while applying the emergency release
- If the dial cannot be accessed at all, the transmission has a separate mechanical neutral release accessed from underneath the vehicle
Shift-lock override location
The emergency release is located in the center of the rotary dial housing on the console, accessed by removing a small cover plug
With zero electrical power
With no power, the rotary dial will not rise from the console. Use the emergency release slot in the dial recess to manually manipulate the selector. The electronic parking brake may also need manual release - access the cargo area, remove the floor panel near the rear right wheel arch to locate the EPB motor, and turn the release screw counterclockwise with a hex key or socket. Some models may require accessing a manual release under the vehicle near the transmission.