🚨 2008 Lexus ES 350: Emergency Neutral
The 2008 ES 350 uses a traditional console-mounted automatic transmission shifter with a P-R-N-D-S gate pattern.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and apply the parking brake fully
- Turn the ignition key to ACC or ON position to provide power to the shift lock system
- Press and hold the brake pedal firmly
- Locate the shift lock override slot: it is under a small rectangular cap directly to the left of the shifter lever, near the base on the console
- Use a flathead screwdriver or the key blade to carefully pry off the override cap
- Insert the screwdriver into the override slot and press down firmly
- While holding the override down and keeping the brake pressed, move the shifter from P to N
- Replace the override cap when done
Shift-lock override location
Under a small cap directly to the left of the shifter lever base on the console
With zero electrical power
With zero 12V power, the shift lock override will still function mechanically. Turn the key to ACC (if the key cylinder allows without power) or proceed directly to using the override slot. The mechanical override releases the shift lock pawl independently of electrical power. However, if you cannot turn the key at all, you may need to jump-start the battery briefly to unlock the steering column.