🚨 2021 Lexus LS 500: Emergency Neutral
The 2021 LS 500 uses an electronic shift-by-wire gear selector lever on the center console.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and set the parking brake firmly.
- Turn the ignition to ON mode if battery has any remaining charge (press START button twice without brake pedal).
- Locate the shift-lock override: look for a small cover cap on the console near the shifter base—typically on the lower left side of the shifter surround.
- Use a flat-blade screwdriver or trim tool to carefully remove the cover cap.
- Insert the screwdriver into the revealed slot and press down or pull up (depending on mechanism) to release the shift lock.
- While holding the override, move the shifter to Neutral position.
- The vehicle should now be in Neutral and can be moved.
Shift-lock override location
Near the shifter base on the console, typically lower left side under a small cover cap
With zero electrical power
The 2018+ LS uses a fully electronic shift-by-wire system. With a completely dead 12V battery, even the mechanical override may not function reliably because the system requires some electrical power to disengage the transmission lock. You will likely need to jump-start the battery enough to power up the shifter module. If jump-starting is not possible, the vehicle must be loaded onto a flatbed with all wheels off the ground or using wheel dollies.