🚨 2019 Mercedes-Benz GLC63 AMG: Emergency Neutral
The 2019 GLC63 AMG (X253 generation) uses a console-mounted electronic selector lever with Mercedes' direct-select system.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground and apply the parking brake firmly
- Turn the ignition to position 2 or press START button twice without foot on brake to power up vehicle electronics
- Press and hold the brake pedal firmly
- Move the shifter lever to N (neutral) position - push lever up once from P
- If shifter will not move: locate the shift lock override access point at the base of the shifter assembly
- Look for a small rectangular cover panel on the right side of the shifter base or under a small trim piece near the shifter boot
- Pry off the cover carefully with a flat-blade screwdriver or trim tool
- Insert a screwdriver into the override slot and press down while moving shifter to N
- Maintain brake pedal pressure throughout
Shift-lock override location
Small covered access slot located at the right side base of the shifter assembly, beneath or adjacent to the shifter boot trim
With zero electrical power
With zero battery power, the electronic shift interlock and transmission parking mechanism remain locked. Jump-start the 12V battery (located in engine bay on right side) to restore minimal power to the shifter system. Once powered, use the override procedure above. Without power restoration, the vehicle cannot be shifted and must be lifted entirely for transport - do not attempt flat-towing.