🚨 2010 Mercury Milan: Emergency Neutral
The 2010 Mercury Milan uses a console-mounted automatic transmission lever with electronic shift interlock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly set and the vehicle is on level ground or properly chocked
- Turn the ignition to the ON position (or ACC if battery is weak but not completely dead) to provide power to the shift interlock system
- Firmly depress the brake pedal and attempt to shift to Neutral normally
- If the shifter will not release from Park, locate the shift interlock override - look for a small plastic cap or cover on the console near the shifter base, typically positioned to the left or front-left of the shifter
- Use a flat-blade screwdriver or key to carefully pry off the override cover cap
- Insert a screwdriver, key, or similar tool into the override slot and press down firmly while simultaneously pulling the shifter release button and moving the shifter to Neutral
- The mechanical override operates without electrical power if the battery is completely dead
Shift-lock override location
Small removable plastic cap on the console near the shifter base, typically on the left or front-left side; override slot is beneath this cap
With zero electrical power
The shift lock override is a mechanical release that functions without any electrical power. Remove the access cover and use a tool to depress the override mechanism while manipulating the shifter. The mechanism is spring-loaded and purely mechanical. A flashlight will assist in locating the slot if interior lights are inoperative.