🚨 1993 Mercury Tracer: Emergency Neutral
The 1993 Tracer uses a floor-mounted console shifter with a mechanical shift lock interlock system.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Apply parking brake and chock wheels securely
- Turn ignition to ACC or ON position if battery has any charge
- Locate the shift lock override slot near the base of the shifter on the console - look for a small plastic cap on the left side or front of the shifter base
- Remove the plastic cap (may require a flathead screwdriver to pry gently)
- Insert a small flathead screwdriver or the ignition key into the override slot
- While holding the tool fully inserted and pressing the shifter button, move the shifter to Neutral
- If moving to a flatbed, you may continue to Park after vehicle is positioned
Shift-lock override location
Near the base of the floor shifter on the console, typically on the left side or front of the shifter base, covered by a small plastic cap
With zero electrical power
With zero power, the mechanical override will still function. Use the override slot procedure above. The shifter button is mechanical and does not require power to operate once the shift lock is overridden.