🚨 2008 Mitsubishi Endeavor: Emergency Neutral
The 2008 Endeavor uses a traditional center console-mounted automatic transmission lever with electronic shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly engaged and the vehicle is on level ground
- Turn the ignition key to the ACC or ON position if battery has any charge remaining
- Locate the shift lock override slot—it is a small rectangular opening with a plastic cover cap located on the right side of the shifter base, near the console trim
- Use a flathead screwdriver or the metal key blade to remove or lift the plastic cover cap
- Insert the screwdriver or key into the override slot and press down firmly
- While holding down the override, press the brake pedal (if possible) and move the shifter to Neutral
- If the brake pedal has no effect due to electrical failure, continue holding the override and shift directly to Neutral
- Keep the override depressed until the shifter is fully in Neutral position
Shift-lock override location
Right side of the shifter base in the center console, covered by a small removable plastic cap
With zero electrical power
With zero electrical power, the shift lock override is purely mechanical and will still function. You do not need battery power to use the override—simply remove the cap, insert a tool into the slot, press down, and shift to Neutral. The ignition does not need to be on.