🚨 2011 Mitsubishi Galant: Emergency Neutral
The 2011 Galant uses a traditional floor-mounted console shifter with a button on the side and electronic shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is firmly applied and wheels are chocked.
- Turn the ignition to the ACC or ON position if battery power is available.
- Locate the shift lock override slot—it is a small rectangular slot on the console near the shifter base, typically covered by a small removable cap or located directly to the left of the shifter near the 'P' position.
- Remove the cap by prying it gently with a flathead screwdriver or your finger.
- Insert a flathead screwdriver, key, or similar tool into the override slot and press down firmly.
- While holding the override down, press the shifter button and move the shifter from Park to Neutral.
- Remove the tool and verify the vehicle is in Neutral before attempting to move it.
Shift-lock override location
Small rectangular slot near the shifter base on the console, typically to the left of the shifter near Park position, covered by a removable cap.
With zero electrical power
With zero electrical power, you cannot turn the ignition to ACC. The shift lock override is mechanical and should still work—use the override slot procedure. However, the shifter button itself may be harder to press without power in some cases; apply firm pressure while holding the override down.