🚨 1994 Mitsubishi Mirage: Emergency Neutral
The 1994 Mitsubishi Mirage with automatic transmission uses a traditional floor-mounted console shifter with a mechanical shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground and the parking brake is firmly engaged.
- Turn the ignition key to the ACC or ON position if battery power is available.
- Locate the shift lock override slot—it is typically a small rectangular slot near the shifter base, often covered by a removable cap or trim piece on the right side of the shifter console.
- Remove the cap or trim covering the override slot (may require prying gently with a flathead screwdriver or similar tool).
- Insert a small flathead screwdriver, key, or similar tool into the override slot and press down firmly.
- While holding the override down and keeping firm brake pressure, move the shifter from Park to Neutral.
- If the vehicle needs to be moved without any electrical power, the override mechanism should still function mechanically—repeat the override procedure without turning the key.
Shift-lock override location
Small rectangular slot near the shifter base on the right side, typically covered by a removable cap or trim piece.
With zero electrical power
The mechanical shift lock override does not require electrical power. Insert tool into override slot, press down, and shift to Neutral. The steering wheel will remain locked without ignition power, so the vehicle must be towed or pushed carefully.