🚨 2023 Mitsubishi Outlander: Emergency Neutral
The 2023 Outlander uses a traditional console-mounted PRND shift lever with an electronic shift lock controlled by the brake-light switch.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and apply the parking brake firmly
- Turn the ignition to ACC or ON position if battery has any charge remaining
- Locate the shift lock override slot - it is a small covered opening on the left side of the shifter base near the console
- Use a small flathead screwdriver or similar tool to remove the cover cap
- Insert the screwdriver into the override slot and press down firmly
- While holding the override down, press the brake pedal and move the shifter to Neutral
- If moving to a flatbed, you may shift through Neutral to reach another gear position as needed
Shift-lock override location
Small covered slot on the left side of the shifter base, adjacent to the console trim
With zero electrical power
With zero electrical power, the shift lock override must be used. The override is mechanical and does not require battery power. You will need to physically press the override while manipulating the shifter - no brake pedal signal is required when using the override.