🚨 2024 Nissan Frontier: Emergency Neutral
The 2024 Frontier uses a console-mounted electronic shifter with shift-by-wire technology and shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground and the parking brake is firmly applied
- Turn the ignition to ACC or ON position if battery power is available
- Locate the shift lock override—look for a small covered slot or access point on the console immediately adjacent to the shifter, typically on the left side
- Remove the small plastic cover cap using a flathead screwdriver or your finger
- While pressing the brake pedal (if power is available), insert a screwdriver or key into the override slot and press down
- While holding the override mechanism down, press the shifter button (if equipped) and move the lever to Neutral
- Once in Neutral, remove the tool and replace the cover cap
Shift-lock override location
Small covered access slot adjacent to the shifter base on the console, likely on the left side—consult owner's manual for exact location
With zero electrical power
The 2022+ Frontier uses shift-by-wire. With no 12V power, the electronic shifter may not function even with the mechanical override. If the override does not work with zero power, the vehicle must be towed on a flatbed with the rear wheels off the ground or all four wheels off the ground. Do not attempt to flat-tow.