🚨 2024 Nissan NP300: Emergency Neutral
The 2024 NP300 uses a traditional column-mounted shift lever with a mechanical shift lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the parking brake is fully engaged and wheels are chocked.
- Turn the ignition key to the ACC or ON position if battery has any charge remaining.
- Locate the shift lock override slot on the steering column near the base of the shifter assembly, typically covered by a small plastic cap.
- Use a small flathead screwdriver or similar tool to pry off the override cover cap.
- Insert the screwdriver into the override slot and press down firmly while simultaneously pulling the shift lever toward you and moving it to Neutral.
- If successful, the shifter will release and move freely to Neutral position.
- Remove the tool and leave the transmission in Neutral for towing.
Shift-lock override location
On the steering column near the base of the shift lever assembly, covered by a small removable plastic cap on the right side of the shifter housing.
With zero electrical power
With zero electrical power, the mechanical shift lock override will still function. You do not need battery power to use the override slot—simply insert the tool and apply pressure while moving the shifter. The key does not need to be in any particular position when using the mechanical override.