🚨 2017 Porsche 718 Boxster S: Emergency Neutral
The 2017 718 Boxster S (982 generation) with PDK dual-clutch transmission features a console-mounted shift lever with an electronic Park button on top.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground with parking brake firmly applied
- Locate the shift lock override access - look for a small removable cover/cap in the lower left area of the shifter base console trim
- Remove the small cover cap carefully (may require a flat tool to pry gently)
- Insert a small flathead screwdriver or the emergency key blade into the override slot
- Press and hold the override down while simultaneously pressing the Park release button on the shifter
- Move the shifter to Neutral position
- Keep the screwdriver engaged in the override slot while shifting if needed
Shift-lock override location
In the lower console area near the base of the shifter assembly, typically on the left side under a small removable cap; consult owner's manual for exact cover location on this specific model year
With zero electrical power
With a completely dead battery, access the jump-start terminal in the front luggage compartment to restore minimal 12V power - this will allow you to turn the ignition to ON position and unlock the steering. The mechanical shift lock override should work without power, but you'll need some electrical power to disengage the electronic parking brake before moving the vehicle. If completely without power and needing to load onto a flatbed, use the shift override and ensure all four wheels are on the bed as the electronic parking brake cannot be released.