🚨 2026 Porsche 718 Spyder: Emergency Neutral
The 2026 718 Spyder uses a console-mounted PDK dual-clutch transmission selector lever with an electronic shift interlock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and apply the parking brake firmly
- Turn the ignition to the ON position (do not need to start the engine) - this powers the shift interlock system
- Press and hold the brake pedal
- Press the button on the side of the shifter and move the selector to neutral
- If the battery is completely dead, see the no-power procedure below
Shift-lock override location
There is a shift-lock override slot located in the console area near the shifter base; consult the owner's manual for the precise location as it may be covered by a small cap that must be pried off
With zero electrical power
With zero 12V power: 1) Jump-start the 12V battery in the front trunk (frunk) to provide enough power to release the shift lock - you only need enough power to activate the interlock, not run the engine. 2) If jump-starting is not possible, locate the shift-lock override slot near the shifter (small cover cap may need removal), insert the key or a small screwdriver, press down while moving the shifter to neutral. The PDK transmission can be in neutral for flatbed loading without drivetrain damage.