🚨 2019 Porsche 911: Emergency Neutral
The 991.2 generation 911 with PDK transmission uses a traditional console-mounted shifter lever with electronic shift-lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and parking brake is engaged
- Turn the ignition to ON position if 12V power is available (do not start engine)
- Press and hold the brake pedal firmly
- Locate the shift-lock override slot on the left side of the shifter base, covered by a small rectangular cap
- Use a small flathead screwdriver or similar tool to gently pry off the override cap
- Insert the screwdriver or key into the override slot and press down firmly
- While holding the override down, move the shifter to Neutral
- If the shifter will not move to Neutral, continue to Park and then back to Neutral for towing
Shift-lock override location
Left side of the shifter base, covered by a small rectangular cap approximately 15mm x 10mm
With zero electrical power
With no 12V power, the shift lock will remain engaged. You must use the mechanical shift-lock override slot. Remove the small cap on the left side of the shifter base, insert a screwdriver into the slot, press down firmly, and shift to Neutral. The override is purely mechanical and does not require any electrical power.