🚨 2025 Rivian EDV 500: Emergency Neutral
The 2025 Rivian EDV-500 commercial van uses an electronic monostable gear selector on the center console that returns to center after each input.
✓ Expert-verified by Chris Hackleman & Jeff Moore — master technicians, 20+ years each.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a level surface and wheel chocks are in place
- Press the brake pedal and attempt to power on the vehicle using the START button
- If 12V power is available, press the gear selector forward or pull backward to N (Neutral) position; the selector will return to center
- Confirm Neutral is engaged by checking the instrument cluster display
- If the selector is locked due to a failed brake-light switch, look for a shift-lock override slot near the base of the gear selector on the console
- Remove any trim cap covering the override slot using a flathead screwdriver
- Insert the physical key or a small screwdriver into the override slot and press down while moving the selector to N
- If 12V power is completely dead, you must jump-start the 12V battery to release the electronic parking brake and engage neutral
Shift-lock override location
Near the base of the center console gear selector; exact location requires inspection as Rivian commercial vehicle documentation is limited (check for a small cap or slot on the right or front side of the selector housing)
With zero electrical power
The EDV-500 requires 12V power to release the electronic parking brake and operate the electronic shifter. With zero power, you must jump-start the 12V system. Once minimal power is restored, you can shift to neutral. The electronic parking brake has no manual release cable in this commercial EV platform.
⚡ EV / hybrid warning
FLATBED TOW ONLY. Do NOT tow with any wheels on the ground. The EDV-500 is an all-wheel-drive electric vehicle with motors at both axles. Towing with wheels down will generate voltage and cause severe damage to the drive system. Activate Transport Mode if possible: with vehicle powered on and in Neutral, access the vehicle settings menu on the center display and select Transport Mode. This disconnects the motors electrically for a limited towing duration.