🚨 2001 Toyota Camry: Emergency Neutral
The 2001 Camry (XV20 generation) uses a floor-mounted console shifter with a P-R-N-D-2-L gate and a mechanical shift lock override.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — cross-check against your owner’s manual when possible.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Set the parking brake firmly and chock the wheels
- Turn the ignition key to the ACC or ON position if battery has any charge remaining
- Locate the shift lock override—there is a small plastic cap or cover near the shifter base on the console, typically on the left-front side of the shifter
- Pry out or remove the small plastic cover using a fingernail or small flathead screwdriver
- Insert a small flathead screwdriver, key, or similar tool into the override slot and press down firmly
- While holding the override down, press the brake pedal (if possible) and move the shifter to Neutral
- If brake pedal cannot be pressed due to no power assist, continue holding override down and shift to Neutral—the override mechanically releases the shift lock
- Replace the override cover after shifting
Shift-lock override location
Small covered slot near the shifter base on the console, typically on the left-front side of the shifter lever
With zero electrical power
With completely dead battery, the shift lock override is purely mechanical and will still function. You do not need electrical power to use the override—simply remove the cover, insert tool, press down, and shift to Neutral. The ignition does not need to be in any position for the mechanical override to work.