🚨 2024 Toyota Probox: Emergency Neutral
The 2024 Toyota Probox uses a traditional column-mounted shift lever, typical of commercial-duty Japanese market vehicles.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on level ground and the parking brake is firmly engaged.
- Turn the ignition key to the ACC or ON position (if battery has sufficient charge).
- Press and hold the brake pedal firmly.
- Locate the shift lock release slot on the column shroud near the base of the shift lever.
- Remove the small plastic cover over the shift lock release slot (it may be marked with a key symbol).
- Insert a small flathead screwdriver or the mechanical key into the release slot and push down firmly.
- While holding the override down, move the shift lever to Neutral.
- If the battery is completely dead and the steering lock is engaged, you may need to jump-start the vehicle briefly to release the steering lock before attempting to move it.
Shift-lock override location
On the column shroud near the base of the shift lever, typically on the right side; look for a small removable cap
With zero electrical power
With zero 12V power, the steering lock may remain engaged. You may need a jump-start to release the steering lock even after using the shift lock override. The shift lock override itself is mechanical and does not require power.