🚨 2007 Toyota Sequoia: Emergency Neutral
The 2007 Sequoia uses a column-mounted automatic shifter with a brake-shift interlock system.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Set the parking brake firmly and chock the wheels
- Turn the ignition key to ACC or ON position if battery has any charge (this may release the interlock)
- Locate the shift lock override slot - it is a small covered slot on the right side of the steering column shroud, near the base of the shifter stalk
- Use a small flathead screwdriver or the metal end of the key to remove the override cover cap
- Insert the screwdriver or key into the override slot and press down firmly
- While holding the override down, press the shifter button and move the shifter to Neutral
- If the vehicle must be towed without power, the override will need to be held while moving to Neutral; have a helper hold it or tape the tool in place temporarily
Shift-lock override location
Small covered slot on the right side of the steering column shroud near the shifter stalk base
With zero electrical power
With zero electrical power, you must use the shift lock override slot. Turn the key to ACC position mechanically (even without battery power, this may mechanically align components). The override slot is mechanical and does not require power - press the tool into the slot firmly while manipulating the shifter button and lever to Neutral. This may require significant force.