U0422moderate severityNetwork
Invalid Data Received from Body Control Module
on 2005-2011 Audi A6 4.2L V8 ยท AWD
What this code means
The data from the BCM is invalid, causing other modules to misinterpret body system states.
Symptoms
- Multiple body electronic glitches
- Lights behaving erratically
- Lock/unlock inconsistent
- Warning messages incorrect
Common causes
- BCM software corruption
- CAN bus noise
- BCM partial failure
- Water damage to BCM
- Bad BCM ground
Diagnostic steps
- Check BCM for stored codes
- Update BCM software
- Test CAN bus signal quality
- Inspect BCM for water damage
- Check BCM ground connections
Repair notes
Reprogram BCM. Check for water intrusion at BCM location. Inspect ground connections.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01314
Engine Control Module (ECM) - no communications
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus