🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2004 AUDI RS6

4.2L Twin-Turbo V8AWDAUTOMATICgasBCYturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this RS6
Every control module on the 2003-2004 Audi RS6 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)3.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission valve body, requires pan removal
🔧 VAS 5051/5052 or VCDS
⚠️ 5-speed Tiptronic; adaptation and coding mandatory; transmission fluid change required during R&R
Climate Control Module (CCM)2.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Behind center dashboard, above radio
🔧 VCDS
⚠️ Basic settings and HVAC flap calibration required after install
Central Convenience Control Module (CCM)1.8 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Behind dashboard, left side near fuse panel
🔧 VCDS
⚠️ Controls windows, locks, lighting; long coding required for feature configuration
ABS/ESP Control Module (ABS)1.5 hr R&Raftermarket tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VCDS or Autel
⚠️ Brake bleeding required after replacement; ESP calibration needed
Gateway Control Module (Gateway)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind dashboard, left of steering column
🔧 VAS 5051/5052
⚠️ Central CAN hub; all modules may need re-adaptation after replacement
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near firewall under plastic cover
🔧 VAS 5051/5052 or VCDS
⚠️ 4.2L V8 twin-turbo; immobilizer adaptation required; component protection may prevent used module swap
Headlight Range Control Module (AFS)1.2 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Behind dashboard, integrated with light switch
🔧 VCDS
⚠️ Xenon headlight leveling; basic settings required
Immobilizer Control Module (Immo)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated in steering column electronics
🔧 VAS 5051/5052
⚠️ Key programming requires dealer access or EEPROM work; component protection
Airbag Control Module (ACM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Center console tunnel, under front seats
🔧 VCDS or Autel
⚠️ Crash data must be cleared; seat occupancy sensor adaptation may be needed
Door Control Module (DCM)1.0 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Inside driver door panel
🔧 VCDS
⚠️ Driver door only; window and mirror calibration required
Radio Navigation System (RNS-E)1.0 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Center dashboard stack
🔧 VCDS
⚠️ Anti-theft code may be required; some units have component protection
Dynamic Ride Control Module (DRC)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk area, left side near spare tire well
🔧 VCDS
⚠️ Air suspension system; ride height calibration required after replacement
Instrument Cluster (IC)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard behind steering wheel
🔧 VAS 5051/5052
⚠️ Mileage programming requires dealer access; component protection active
Seat Memory Control Module (Seat Memory)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver seat
🔧 VCDS
⚠️ Driver side only; memory positions lost on replacement
Park Distance Control Module (PDC)0.7 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk area, right side panel
🔧 VCDS
⚠️ Sensor calibration may be needed
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →