🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2025 AUDI S5

3.0L Turbo V6AWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this S5
Every control module on the 2017-2026 Audi S5 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Transmission Control Module (TCM)5.0 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Inside transmission housing (Mechatronic unit for S tronic DSG)
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Mechatronic replacement requires transmission removal. Component protection and security gateway active. Clutch adaptation mandatory.
ABS/ESP Control Module (ABS)2.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine bay, driver side near brake master cylinder, integrated with hydraulic unit
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Brake bleeding required. Component protection active. VIN coding and sensor adaptation needed.
Headlight Control Module / Matrix LED Module (AFS / Matrix LED)1.8 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Each headlight assembly (module integrated in headlight)
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ LED/Matrix LED headlights. Component protection may apply. Headlight aim calibration required. Left and right modules separate.
MMI Control Module (MMI 3G+ / MMI Touch)1.8 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Dashboard, under passenger seat or behind center screen
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Component protection active. Navigation data on separate SD card. May require online activation for full features.
Airbag Control Module (ACM)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Center console tunnel, under center console trim between front seats
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Battery disconnect mandatory. Crash data clearing requires authentication. Component protection active.
Central Convenience Control Module (CCM / Comfort Module)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, driver side lower dash panel or behind fuse panel
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Controls windows, locks, lighting. Component protection active. Remote key adaptation required.
All-Wheel Drive Control Module (Quattro / AWD Module)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Undercarriage, mounted on rear differential or transfer case
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Controls torque distribution. Component protection may apply. Adaptation required.
Steering Column Electronics / Steering Angle Sensor (SAS / J527)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Steering column, under lower dash trim at column base
🔧 VCDS or Autel
⚠️ Steering angle calibration mandatory. Drive straight and center steering for calibration.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Inside each door, behind door panel near latch
🔧 VCDS or Autel
⚠️ Controls window, mirror, lock per door. Window one-touch calibration required.
Engine Control Module (ECM)1.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Engine bay, driver side firewall area, mounted on bracket near brake booster
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Component protection active. Security gateway requires online authentication. Immobilizer pairing mandatory.
Climate Control Module (CCM)1.2 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard, behind center HVAC control panel
🔧 VCDS or Autel
⚠️ Automatic climate control requires flap calibration. Some advanced functions may need dealer coding.
Adaptive Cruise Control Radar Module (ACC Radar)1.2 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Front bumper, center behind lower grille
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Component protection active. Radar calibration required after replacement or bumper removal. Static or dynamic calibration.
Instrument Cluster / Virtual Cockpit (IC)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, behind instrument panel in driver binnacle
🔧 ODIS Engineering or Autel with AutoAuth
⚠️ Virtual Cockpit (digital display). Mileage programming requires dealer authentication. Component protection active.
Gateway Control Module (Gateway)1.0 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Dashboard, behind center console lower trim or under driver side dash
🔧 ODIS Engineering
⚠️ Security gateway. Replacement requires Audi security access code and online authentication. Critical for all module communication.
Keyless Access Control Module (Kessy)1.0 hr R&Rsecurity gateway +1.2 hr▸ programming details
📍 Dashboard, integrated with steering column electronics or separate module under dash
🔧 ODIS Engineering
⚠️ Key programming requires dealer access and online authentication. All keys must be present. Component protection active.
Suspension Control Module (CDC / Adaptive Dampe)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Trunk, driver side rear corner near shock tower (if equipped with adaptive suspension)
🔧 VCDS or Autel
⚠️ Audi Drive Select equipped vehicles. Damper calibration required after replacement.
Telematics Control Module (TCU / Audi Connect)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Trunk, passenger side rear corner or under rear shelf
🔧 ODIS Engineering
⚠️ Component protection active. Requires SIM card and online subscription activation. LTE/4G equipped.
Park Assist Control Module (PDC / Park Assist)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, driver side trim panel behind wheel well
🔧 VCDS or Autel
⚠️ Sensor calibration required. May integrate with camera system.
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Trunk, under trunk floor near fuel tank access panel
🔧 VCDS or Autel
⚠️ Controls in-tank fuel pump. Depressurize fuel system before R&R.
Rear View / Surround View Camera Module (RVC / Area View)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear trunk lid (rear camera), front grille and side mirrors (surround view if equipped)
🔧 VCDS or Autel
⚠️ Surround view has multiple cameras. Calibration for parking guidelines required.
Seat Memory Control Module (Seat Module)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver and passenger seats, mounted to seat frame
🔧 VCDS or Autel
⚠️ Memory seats only. Calibration for full travel limits may be needed.
Wireless Charging Module (Wireless Charger)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Center console, front storage compartment
🔧 VCDS or Autel
⚠️ Optional equipment. Qi wireless charging. Minimal coding typically required.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →