🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2008–2015 AUDI TTS

2.0L Turbo I4AWDDCTgasCDLAturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this TTS
Every control module on the 2008-2014 Audi TTS — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Mechatronic Control Module (TCM)4.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Inside transmission (S tronic dual-clutch), requires transmission oil drain and pan removal
🔧 VAS 5052/5054 or ODIS required for adaptation and clutch learning
⚠️ Mechatronic unit integral to transmission. Replacement requires transmission fluid change, clutch adaptation, and extensive coding. High failure rate on early 8J models.
Electromechanical Power Steering Control Module (EPS)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, under dashboard
🔧 VAS 5052/5054 or ODIS
⚠️ Electric power steering. Steering angle sensor calibration required after replacement.
ABS/ESP Control Module (ABS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left front near brake master cylinder
🔧 VAS 5052/5054 or ODIS, VCDS can code but bleeding requires dealer tool
⚠️ Brake bleeding function typically requires dealer tool for proper ABS pump cycling.
Climate Control Module (CCM)1.5 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Dashboard center, behind climate control panel
🔧 VCDS or VAS tools
⚠️ Automatic climate control (Climatronic). Basic adaptation usually sufficient.
Door Control Module (DCM)1.2 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Inside door panel (driver and passenger doors)
🔧 VCDS or VAS tools
⚠️ Controls windows, mirrors, locks per door. Typically driver and passenger doors only on TTS.
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine bay, left side near firewall, below intake manifold
🔧 VAS 5052/5054 or ODIS, VCDS (Ross-Tech) for most functions
⚠️ Immobilizer adaptation requires dealer-level access or EEPROM programming. Component protection active on 2013+ models.
Airbag Control Module (ACM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Center console, under center armrest or behind climate controls
🔧 VAS 5052/5054 or ODIS, VCDS can clear crash data on some model years
⚠️ Crash data stored; replacement after deployment requires coding and crash data clearing.
Gateway Control Module (Gateway)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, left side behind fuse panel or center console area
🔧 VAS 5052/5054 or ODIS
⚠️ Central CAN gateway. No SGW authentication in this generation. Replacement requires coding for all connected modules.
Adaptive Headlight Control Module (AFS)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Engine bay, behind headlight assemblies (one per side)
🔧 VCDS or VAS tools
⚠️ Xenon adaptive headlights. Leveling and range adjustment required after replacement.
Magnetic Ride Control Module (MRC / Damper Control)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, left or right side panel
🔧 VCDS or VAS tools
⚠️ Optional Audi Magnetic Ride adaptive dampers. Not present on all TTS models.
Instrument Cluster (IC)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Dashboard, behind steering wheel
🔧 VAS 5052/5054 or ODIS required for mileage programming
⚠️ Component protection: mileage and VIN locked. Replacement requires dealer programming to transfer mileage from immobilizer.
Fuel Pump Control Module (FPCM)0.8 hr R&Rno coding
📍 Under rear seat or in trunk, near fuel tank
⚠️ Controls in-tank fuel pump. Typically plug-and-play, no coding required.
Park Distance Control Module (PDC)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear bumper area, behind trim or in trunk
🔧 VCDS or VAS tools
⚠️ Parking sensors front and rear. Basic coding for sensor configuration.
Radio/Navigation Control Module (RNS-E / Concert)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Dashboard center, in radio slot
🔧 VCDS or VAS tools
⚠️ RNS-E navigation or Concert radio. May require radio code entry. Coding for vehicle-specific features.
Seat Memory Control Module (Seat Memory)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under driver seat
🔧 VCDS or VAS tools
⚠️ Optional power seats with memory. Not present on all TTS models.
Immobilizer Control Module (Immo)dealer / factory tool +0.5 hr▸ programming details
📍 Integrated into instrument cluster or steering column electronics
🔧 VAS 5052/5054 or ODIS, EEPROM programming for aftermarket
⚠️ Key programming and immobilizer adaptation dealer-only or requires EEPROM work. Keyless entry/start on some models.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →