B0200low severityBody
Driver Power Window Motor Circuit
on 2008 Dodge Viper 8.4L V10 · RWD
What this code means
Malfunction in the driver power window motor circuit. The window may not move or moves erratically.
Symptoms
- Driver window not moving
- Window moves slowly
- Window drops into door
- Motor runs but window does not move
- Blown window fuse
Common causes
- Faulty window motor
- Window regulator cable broken
- Master window switch failure
- Wiring damage in door
- Blown fuse
Diagnostic steps
- Check window fuse
- Test master window switch
- Apply direct power to window motor
- Inspect window regulator
- Check wiring in door harness
Repair notes
Replace window motor, regulator, or switch as needed. Check for broken regulator cables.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open