B0262moderate severityBody
Convertible Top Latch Circuit
on 2008 Dodge Viper 8.4L V10 · RWD
What this code means
Malfunction in the convertible top latch mechanism or its electrical circuit.
Symptoms
- Top will not latch at windshield header
- Top warning light on
- Wind noise at highway speed
- Water leak at top edge
Common causes
- Faulty electric latch motor
- Latch out of adjustment
- Wiring to latch damaged
- Latch mechanism corroded or stuck
Diagnostic steps
- Test latch motor with direct power
- Inspect latch alignment
- Check wiring to latch
- Lubricate latch mechanism
- Adjust latch striker
Repair notes
Adjust or replace latch mechanism. Lubricate latch components. Repair wiring if damaged.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open