B0461low severityBody
Amplifier Circuit Malfunction
on 2008 Dodge Viper 8.4L V10 · RWD
What this code means
Malfunction in the audio amplifier circuit. The amplifier is not producing audio output.
Symptoms
- No sound from speakers
- Audio cuts out intermittently
- Distorted audio from all speakers
- Amplifier overheating
Common causes
- Faulty amplifier
- Speaker wiring short causing amp protection mode
- Power supply issue to amplifier
- Water damage to trunk-mounted amplifier
- Overheating from blocked ventilation
Diagnostic steps
- Check amplifier power and ground
- Test speaker wiring for shorts
- Inspect amplifier for water damage
- Check amplifier ventilation
- Test head unit audio output
Repair notes
Replace amplifier or repair speaker wiring. Check for water intrusion if trunk-mounted.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open