U0102high severityNetwork
Lost Communication with Transfer Case Control Module
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
Cannot communicate with the transfer case control module that manages AWD/4WD operation.
Symptoms
- 4WD/AWD warning light on
- Transfer case stuck in mode
- Cannot switch between 2WD and 4WD
- Service 4WD message
Common causes
- Transfer case module power failure
- CAN bus wiring to module
- Transfer case module failure
- Fuse blown
- Connector corrosion
Diagnostic steps
- Check transfer case module fuse
- Test module power and ground
- Inspect CAN bus wiring to module
- Try direct communication with module
- Check connector for corrosion
Repair notes
Check fuses and power supply first. Common on trucks after water fording.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus