U0314high severityNetwork
Software Incompatibility With Four Wheel Drive Control Module
on 2015 Kia Forte 1.8L I4 · FWD
What this code means
The four wheel drive control module software does not match the network. This can affect 4WD engagement and performance.
Symptoms
- 4WD warning light on
- 4WD not engaging properly
- Reduced traction
Common causes
- Mismatched module software version
- Module replaced without programming
- Incomplete software update
- Failed 4WD control module
Diagnostic steps
- Check software versions across modules
- Compare against manufacturer specs
- Reprogram module with correct software
- Retest 4WD operation
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus