P0046moderate severityPowertrain
Turbo/Supercharger Boost Control Solenoid Circuit Range/Performance
on 2007 Mercedes-Benz S65 AMG 6.0L V12 BiTurbo M275 · RWD
What this code means
The boost control solenoid is not responding within expected parameters.
Symptoms
- Check Engine Light
- Overboosting or underboosting
- Reduced power
- Surging
Common causes
- Sticking solenoid
- Vacuum leak
- Wastegate stuck
- Boost pressure sensor fault
Diagnostic steps
- Monitor boost pressure vs commanded
- Test solenoid operation
- Check vacuum lines
- Inspect wastegate
Repair notes
Replace solenoid or repair wastegate.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1