Free API
C0080low severityChassis

Steering Position Sensor Calibration Not Performed

on 2016 Toyota Corolla 1.8L I4 · FWD

What this code means

The steering angle sensor has not been calibrated or the calibration was lost.

Symptoms

  • Stability control light on
  • ESC inoperative
  • Lane departure warning inactive
  • Steering center point unknown to module

Common causes

  • Battery disconnect cleared calibration
  • Alignment performed without recalibration
  • Module replacement
  • Steering component service

Diagnostic steps

  1. Perform steering angle sensor calibration with scan tool
  2. Drive vehicle in a circle to auto-learn center point
  3. Verify calibration completed successfully
  4. Check for other stability codes that prevent calibration

Repair notes

Perform steering angle sensor calibration. Most vehicles require a scan tool procedure followed by a driving routine.

Other Chassis codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2016 Toyota Corolla repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Corolla — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →