Free API
P0450low severityPowertrain

Evaporative Emission System Pressure Sensor/Switch Malfunction

on 2016 Toyota Corolla 1.8L I4 · FWD

What this code means

The PCM detected a fault with the EVAP pressure sensor or switch. This can prevent accurate monitoring of fuel vapor system pressure.

Symptoms

  • Check engine light on
  • Failed emissions test
  • No driveability change

Common causes

  • Faulty EVAP pressure sensor
  • Wiring or connector fault
  • Damaged fuel tank or vapor lines
  • Failed PCM input circuit

Diagnostic steps

  1. Retrieve code and freeze frame
  2. Inspect pressure sensor wiring
  3. Test sensor signal and reference voltage
  4. Verify EVAP system integrity

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2016 Toyota Corolla repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Corolla — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →