🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2020 VOLVO S60 RECHARGE

2.0L Turbo I4 HybridAWDAUTOMATIChybridB4204T35turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this S60 Recharge
Every control module on the 2020-2025 Volvo S60 Recharge — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Battery Energy Control Module (BECM)3.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Rear cargo area, mounted on high-voltage battery pack
🔧 Volvo VIDA
⚠️ High-voltage system; requires HV safety lockout and insulated tools; controls 11.6 kWh lithium-ion battery; critical safety module
Transmission Control Module (TCM)2.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated with transmission assembly, left side of engine bay
🔧 Volvo VIDA
⚠️ 8-speed automatic; requires transmission removal for access; adaptive learning reset mandatory
Central Electronic Module (CEM)1.8 hr R&Rdealer / factory tool +2.0 hr▸ programming details
📍 Behind glove box, right side of dashboard
🔧 Volvo VIDA
⚠️ Body control and secondary gateway functions; controls lighting, wipers, central locking; replacement is complex and time-consuming
Central Gateway Module (CGW)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind center console, under dashboard
🔧 Volvo VIDA
⚠️ Primary security gateway; replacement requires extensive network reconfiguration and all module re-authentication
Brake Control Module (BCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near brake master cylinder
🔧 Volvo VIDA
⚠️ Integrated ABS/ESC/traction control; brake bleeding required after replacement; acronym conflicts with body control (CEM is Volvo's body controller)
Climate Control Module (CCM)1.5 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Behind center dashboard, above center console
🔧 Volvo VIDA
⚠️ Dual-zone automatic climate; refrigerant recovery required for full HVAC access
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall area behind battery
🔧 Volvo VIDA
⚠️ Hybrid powertrain requires both ICE ECM and BECM coordination; VIN-locked with online authentication required
Power Steering Control Module (PSCM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Steering column, below dashboard
🔧 Volvo VIDA
⚠️ Electric power steering; steering angle sensor calibration required after replacement
Active High Beam Control Module (AHB)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Integrated in headlight assemblies (left and right)
🔧 Volvo VIDA
⚠️ LED headlights with active bending and high beam assist; headlight aim calibration required after replacement
Infotainment Control Module / Sensus Connect (ICM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center touchscreen, center dashboard
🔧 Volvo VIDA
⚠️ 9-inch vertical touchscreen; Android-based system; software updates via OTA or VIDA
Supplemental Restraint System Module (SRS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console tunnel, below center stack
🔧 Volvo VIDA
⚠️ Battery disconnect and 10-minute wait mandatory; crash data retrieval possible
Passive Entry Passive Start Module (PEPS)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Center console area, integrated with CEM communication
🔧 Volvo VIDA
⚠️ Keyless entry/start; key fob programming mandatory; security-critical module
Steering Wheel Module (SWM)1.0 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Steering wheel, integrated behind airbag
🔧 Autel or VIDA
⚠️ Steering wheel controls and heating; button function relearn typically automatic
Radar Control Module (RCM)1.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Front bumper, center behind grille
🔧 Volvo VIDA
⚠️ Adaptive cruise control and collision avoidance; ADAS calibration with alignment targets mandatory after replacement or bumper work
Active Chassis Control Module / Four-C Module (ACCM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear cargo area, right side near wheel well
🔧 Volvo VIDA
⚠️ Adaptive damping system (optional); ride height and damper calibration required
Telematics Control Module (TCU)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center console, under dashboard
🔧 Volvo VIDA
⚠️ 4G LTE connectivity; Volvo On Call services; subscription activation required after replacement
Park Assist Module (PAM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Rear cargo area, left side trim panel
🔧 Autel or VIDA
⚠️ Front and rear parking sensors; sensor calibration required after replacement
Door Control Module (DCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Inside each door (four modules total)
🔧 Autel or VIDA
⚠️ Window, mirror, and lock control; window auto-up/down relearn required after replacement
Driver Information Module (DIM)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument cluster housing, behind steering wheel
🔧 Volvo VIDA
⚠️ 12.3-inch digital display; mileage programming from CEM required; VIN-locked
Fuel Pump Control Module (FPCM)0.8 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Under rear seat, above fuel tank
🔧 Autel or VIDA
⚠️ Controls fuel pump relay and pressure; basic relearn possible with advanced aftermarket tools
Power Tailgate Module (PTM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Tailgate, left side interior trim
🔧 Autel or VIDA
⚠️ Hands-free power liftgate; height memory programming and pinch protection calibration required
Seat Control Module (SCM)0.6 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Under front seats (driver and passenger)
🔧 Autel or VIDA
⚠️ Power seat memory and heating/ventilation; memory relearn via seat controls or scan tool
Trailer Module (TRM)0.6 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Rear cargo area, left side near hitch area
🔧 Autel or VIDA
⚠️ Trailer lighting and brake controller (if equipped); configuration via CEM
Rear View Camera Module (RVCM)0.5 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Tailgate, integrated in handle assembly
🔧 Autel or VIDA
⚠️ 360-degree camera system component; camera alignment/calibration via ICM menu or scan tool
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →