🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2025 VOLVO S90

2.0L I4 TurboAWDAUTOMATICgasturbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this S90
Every control module on the 2017-2026 Volvo S90 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Central Electronic Module (CEM)3.0 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Behind dashboard, driver side or center console
🔧 VIDA/MVCI + Volvo authentication
⚠️ Primary body controller; manages lighting, wipers, locks, windows. VIN-locked; requires complete vehicle configuration download.
Battery Energy Control Module (BECM)2.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Trunk area or under rear seat, near high-voltage battery
🔧 VIDA/MVCI + Volvo authentication
⚠️ T8 plug-in hybrid only; high-voltage system safety procedures required. Battery registration and balancing mandatory.
Power Steering Control Module (PSCM)2.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Steering column or rack assembly
🔧 VIDA/MVCI
⚠️ Electric power steering; steering angle sensor calibration required after replacement.
Central Gateway Module (CGW)2.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Behind dashboard, center console area or A-pillar
🔧 VIDA/MVCI + Volvo authentication
⚠️ Security gateway; controls access to all vehicle networks. Replacement requires factory authorization.
Climate Control Module (CCM)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind center dashboard, integrated with HVAC unit
🔧 VIDA/MVCI
⚠️ Four-zone climate on some models; actuator calibration required.
Sensus Connect Infotainment Control Module (ICM)2.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Center dashboard, behind touchscreen display
🔧 VIDA/MVCI
⚠️ 9-inch or 12-inch touchscreen; Android-based system requires software installation and account pairing.
Brake Control Module (BCM)2.0 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, left side near brake master cylinder or under hood near ABS pump
🔧 VIDA/MVCI
⚠️ Integrated with stability control and brake-by-wire functions; bleeding and calibration required.
Vision Control Module / Camera Module (VCM)2.0 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Behind windshield, top center (forward camera) or rear liftgate (rear camera)
🔧 VIDA/MVCI + ADAS calibration
⚠️ 360-degree camera system and forward-facing ADAS camera; static and dynamic calibration required. Windshield replacement requires recalibration.
Transmission Control Module (TCM)2.0 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Transmission housing or tunnel, driver side
🔧 VIDA/MVCI
⚠️ Aisin 8-speed; adaptive learning reset required after coding.
Driver Information Module (DIM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Dashboard, behind instrument cluster
🔧 VIDA/MVCI
⚠️ Digital cluster; mileage and VIN programming mandatory.
Door Control Module (DCM)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Inside each door, behind door panel
🔧 VIDA/MVCI
⚠️ Controls windows, locks, mirrors; four modules (one per door). Window auto-up/down relearn required.
Engine Control Module (ECM)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Engine bay, left side firewall or top of engine
🔧 VIDA/MVCI
⚠️ SPA platform; requires online VIN configuration and software download from Volvo servers.
Active High Beam Control Module (AHB)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind front bumper or integrated in headlight assembly
🔧 VIDA/MVCI
⚠️ Thor's Hammer LED headlights; adaptive beam control requires camera calibration.
Passive Entry Passive Start Module (PEPS)1.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Center console or behind dashboard
🔧 VIDA/MVCI + Volvo authentication
⚠️ Keyless entry/start; key fob programming requires dealer access and security authentication.
Radar Control Module (RCM)1.5 hr R&Rdealer / factory tool +1.5 hr▸ programming details
📍 Front bumper, center behind grille or rear bumper
🔧 VIDA/MVCI + ADAS calibration
⚠️ Adaptive cruise control and collision avoidance; aiming and calibration mandatory after replacement or bumper work.
Active Chassis Control Module / Four-C Module (ACCM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Trunk area, driver side or under rear seat
🔧 VIDA/MVCI
⚠️ Air suspension and adaptive damping; ride height calibration required.
Telematics Control Module (TCU)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind dashboard, center console or under rear seat
🔧 VIDA/MVCI
⚠️ Volvo On Call connectivity; SIM card and subscription activation required.
Supplemental Restraint System Module (SRS)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console tunnel, under front seats
🔧 VIDA/MVCI
⚠️ Crash data stored; must be replaced after deployment and coded to vehicle.
Power Tailgate Module (PTM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Rear liftgate, driver side or center
🔧 VIDA/MVCI
⚠️ Power liftgate with hands-free opening; height calibration required after replacement.
Park Assist Module (PAM)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Trunk area, behind rear trim or under rear bumper
🔧 VIDA/MVCI
⚠️ Ultrasonic parking sensors; sensor calibration required after replacement.
Fuel Pump Control Module (FPCM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Under rear seat or in trunk, near fuel tank
🔧 VIDA/MVCI
⚠️ Controls fuel pump speed and pressure; coding may be optional on some model years.
Steering Wheel Module (SWM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Steering wheel, behind airbag
🔧 VIDA/MVCI
⚠️ Steering wheel controls and heating; button configuration may require coding.
Trailer Module (TRM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear of vehicle, near hitch or in trunk area
🔧 VIDA/MVCI
⚠️ Optional equipment; manages trailer lighting and brake controller.
Seat Control Module (SCM)0.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Under front seats, driver and passenger side
🔧 VIDA or Autel
⚠️ Power seat memory and heating/cooling; multiple modules (one per seat).
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →