🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2026 VOLVO XC40 RECHARGE

Twin Motor AWDAWDAUTOMATICev
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this XC40 Recharge
Every control module on the 2020-2026 Volvo XC40 Recharge — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Battery Energy Control Module (BECM)4.5 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Under rear cargo floor, integrated with high-voltage battery pack
🔧 VIDA with DiCE/MVCI
⚠️ High-voltage system; requires HV safety certification and isolation procedures. VIN-locked to vehicle. Controls battery thermal management, cell balancing, and SOC calculation.
Electric Motor Control Module (EMCM)3.2 hr R&Rsecurity gateway +1.0 hr▸ programming details
📍 Front motor compartment, mounted on electric drive unit
🔧 VIDA with DiCE/MVCI
⚠️ Controls front and rear electric motors (dual-motor AWD). Requires HV isolation before service. Software calibration critical for torque vectoring.
Power Steering Control Module (PSCM)2.5 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Integrated with electric power steering column, under dash
🔧 VIDA with DiCE/MVCI
⚠️ Steering angle sensor calibration required after replacement. Integrated with lane-keeping assist functions.
Heat Pump Control Module (HPCM)2.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Front motor compartment, integrated with HVAC system
🔧 VIDA with DiCE/MVCI
⚠️ Electric heat pump for cabin heating/cooling. Improves cold-weather range. Refrigerant system service required.
Central Gateway Module (CGW)1.8 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Behind center console, near CEM location
🔧 VIDA with DiCE/MVCI
⚠️ Security gateway controlling CAN/FlexRay network access. Replacement requires full vehicle configuration download and all module re-authentication.
Climate Control Module (CCM)1.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Behind center dash, above center console
🔧 VIDA with DiCE/MVCI
⚠️ Controls electric heat pump system. Requires refrigerant recovery/recharge if lines disturbed.
Central Electronic Module (CEM)1.5 hr R&Rsecurity gateway +1.5 hr▸ programming details
📍 Behind glove box, passenger side
🔧 VIDA with DiCE/MVCI
⚠️ Primary body control and security coordinator. Replacement requires complete vehicle configuration and all accessory module re-pairing.
Infotainment Control Module (ICM)1.5 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Behind center touchscreen, center dash
🔧 VIDA with DiCE/MVCI
⚠️ Android-based Sensus system (2020-2023) or Google Automotive OS (2024+). Requires account re-pairing and software download.
Brake Control Module (BCM)1.2 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Engine compartment, driver side near firewall
🔧 VIDA with DiCE/MVCI
⚠️ Integrated ABS, stability control, and regenerative braking coordination. Brake bleed required after replacement.
Power Tailgate Module (PTM)1.2 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Tailgate, driver side interior
🔧 VIDA with DiCE/MVCI
⚠️ Power liftgate with hands-free opening. Height memory programming required after replacement.
Telematics Control Module (TCU)1.2 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Behind center console or under rear seat
🔧 VIDA with DiCE/MVCI
⚠️ 4G LTE connectivity. Requires carrier activation and Volvo On Call subscription pairing.
Supplemental Restraint System Module (SRS)1.0 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Center console, below shifter area
🔧 VIDA with DiCE/MVCI
⚠️ VIN-locked. Requires crash data clear and occupant classification system calibration after replacement.
Door Control Module (DCM)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Inside each door, behind trim panel
🔧 VIDA with DiCE/MVCI
⚠️ Four modules total (one per door). Controls windows, locks, mirrors, and puddle lights. Window auto-up/down relearn required.
Active High Beam Control Module (AHB)1.0 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Integrated in headlight assemblies
🔧 VIDA with DiCE/MVCI
⚠️ LED headlights with active bending and auto high-beam. Headlight aim calibration required after replacement.
Passive Entry Passive Start Module (PEPS)1.0 hr R&Rsecurity gateway +0.8 hr▸ programming details
📍 Center console area, integrated with CEM
🔧 VIDA with DiCE/MVCI
⚠️ All key fobs must be re-programmed after module replacement. Requires all keys present for programming.
Driver Information Module (DIM)0.8 hr R&Rsecurity gateway +0.5 hr▸ programming details
📍 Instrument cluster housing, behind steering wheel
🔧 VIDA with DiCE/MVCI
⚠️ 12.3-inch digital display. VIN and mileage programming required. Odometer transfer legally required.
Park Assist Module (PAM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear cargo area, driver side trim panel
🔧 VIDA with DiCE/MVCI
⚠️ Controls ultrasonic parking sensors front and rear. Sensor calibration required after replacement.
Blind Spot Information System Module (BLIS)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear bumper, left and right corners
🔧 VIDA with DiCE/MVCI
⚠️ Dual radar sensors for blind spot and cross-traffic alert. Calibration required after bumper work.
Trailer Module (TRM)0.8 hr R&Rdealer / factory tool +0.3 hr▸ programming details
📍 Rear cargo area, behind left trim panel
🔧 VIDA with DiCE/MVCI
⚠️ Optional equipment. Controls trailer lighting and brake controller integration. Towing capacity limited on electric model.
Seat Control Module (SCM)0.6 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Under driver and passenger seats
🔧 VIDA or Autel MaxiSys
⚠️ Controls power seat adjustment, heating, and memory functions. Separate modules for driver and passenger seats.
Rear View Camera Module (RVCM)0.5 hr R&Raftermarket tool +0.2 hr▸ programming details
📍 Integrated in tailgate handle
🔧 VIDA or Autel MaxiSys
⚠️ 360-degree camera system on higher trims includes additional side cameras in mirrors.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →