🚨 2023 Audi S6: Emergency Neutral
The 2023 S6 uses a traditional electronic console-mounted shifter lever with electronic park lock.
🧰 Drafted with AI under the editorial review of Chris Hackleman & Jeff Moore — details like the exact override location may vary by trim; verify visually before prying anything.
⚠️ Chock the wheels first — neutral means the car can roll. Set the parking brake while you work, never stand downhill of the vehicle, and try a 12-volt jump before any override: power fixes most stuck-in-park problems instantly.
The procedure
- Ensure the vehicle is on a flat surface and apply the parking brake if it functions.
- Turn the ignition to ON/accessory mode if any battery power remains (press START button without brake pedal twice).
- Locate the shift lock override slot—it is typically a small rectangular opening covered by a removable cap on the shifter console, usually to the right or front of the shifter base.
- Use a flat-blade screwdriver or the key blade to carefully pry off the cap covering the override slot.
- Press the brake pedal and simultaneously insert a small screwdriver, pen, or similar tool into the override slot and press down firmly.
- While holding the override down, move the shifter from Park to Neutral.
- If the shifter will not move, ensure the ignition is in ON mode and the override tool is fully depressed; you may need to wiggle the shifter slightly while pressing the override.
Shift-lock override location
Small rectangular slot covered by a cap, typically located on the shifter console to the right or directly forward of the shifter base—check both sides if not immediately visible.
With zero electrical power
With completely dead battery, the electronic shifter may not release even with the override—you may need to jump-start the 12V battery with a portable jump pack or another vehicle to provide minimal power to the shifter module. If unsuccessful, the vehicle must be placed on dollies or a flatbed with all wheels off the ground.